Fujitsu MHD2032AT, MHC2032AT, MHD2021AT Surface temperature measurement points and standard values

Contents

Table 3.1	Surface temperature measurement points and standard values
	3-6
Table 3.2	Cable connector specifications		3-9
Table 4.1	Self-calibration execution timechart			4-9
Table 4.2	Write precompensation algorithm			4-10
Table 5.1	Signal assignment on the interface connector				5-3
Table 5.2	I/O registers 5-7
Table 5.3	Command code and parameters		5-14
Table 5.4	Information to be read by IDENTIFY DEVICE command						5-
	32
Table 5.5	Features register values and settable modes				5-38
Table 5.6	Diagnostic code	5-43
Table 5.7	Features Register values (subcommands) and functions						5-54
Table 5.8	Format of device attribute value data			5-56
Table 5.9	Format of insurance failure threshold value data					5-57
Table 5.10	Contents of security password		5-61
Table 5.11	Contents of SECURITY SET PASSWORD data					5-65
Table 5.12	Relationship between combination of Identifier and Security
	level, and operation of the lock function 5-66
Table 5.13	Command code and parameters		5-68
Table 5.14	Parallel generation equation of CRC polynomial					5-90
Table 5.15	Recommended series termination for Ultra DMA					5-91
Table 5.16	Ultra DMA data burst timing requirements				5-97
Table 6.1	Default parameters	6-7

xiv C141-E050-02EN