Fujitsu MPF3XXXAH manual Command code and parameters 2

Table 5.4 Command code and parameters (2 of 2)

Command name				Command code (Bit)								Parameters used
	7		6		5	4	3	2	1	0	FR		SC	SN	CY	DH
STANDBY IMMEDIATE	1		0		0	1	0	1	0	0	N		N	N	N	D
	1		1		1	0	0	0	0	0
SLEEP	1		0		0	1	1	0	0	1	N		N	N	N	D
	1		1		1	0	0	1	1	0
CHECK POWER MODE	1		0		0	1	1	0	0	0	N		N	N	N	D
	1		1		1	0	0	1	0	1
SMART	1		0		1	1	0	0	0	0	Y		Y	Y	Y	D
FLUSH CACHE	1		1		1	0	0	1	1	1	N		N	N	N	D
SECURITY DISABLE PASSWORD	1		1		1	1	0	1	1	0	N		N	N	N	D
SECURITY ERASE PREPARE	1		1		1	1	0	0	1	1	N		N	N	N	D
SECURITY ERASE UNIT	1		1		1	1	0	1	0	0	N		N	N	N	D
SECURITY FREEZE LOCK	1		1		1	1	0	1	0	1	N		N	N	N	D
SECURITY SET PASSWORD	1		1		1	1	0	0	0	1	N		N	N	N	D
SECURITY UNLOCK	1		1		1	1	0	0	1	0	N		N	N	N	D
SET MAX ADDRESS	1		1		1	1	1	0	0	1	N		Y	Y	Y	Y
READ NATIVE MAX ADDRESS	1		1		1	1	1	0	0	0	N		N	N	N	D
Notes:
FR : Features Register		CY: Cylinder Registers
SC : Sector Count Register		DH : Drive/Head Register
SN : Sector Number Register

R: R = 0 or 1

Y: Necessary to set parameters

Y*: Necessary to set parameters under the LBA mode.

N:Necessary to set parameters (The parameter is ignored if it is set.) N*: May set parameters

D: The device parameter is valid, and the head parameter is ignored.

D*: The command is addressed to the master device, but both the master device and the slave device execute it.

X: Do not care

C141-E106-01EN 5 - 15