Chapter 1 Installing ETERNUSmgr
>1.6 Procedure
1.6.1Installation by rpm Command
Execute
Format:rpm
* VxxLxx refers to the version/level number.
Procedure
1Login as the superuser, and go to the directory where the install package is located.
2Follow the above format and enter the "rpm" command.
•When installing ETERNUSmgr V20L30 to the "/opt/FJSVgrmgr/" default directory
(Example) # rpm
When specifying the installation directory, use the following example as a reference to execute the "rpm" command.
Format:rpm
•When installing ETERNUSmgr V20L30 to the "/usr/share/" directory
(Example) # rpm
3 This complete the installation with the "rpm" command.
If installation completed normally, the following message will appear:
(message displayed)
# Install of FJSVgrmgr completed.
End of procedure
Setup the environment settings by executing the ETERNUSmgr environment setup script. ETERNUSmgr cannot activate normally if the environment is not set.
1.6.2ETERNUSmgr Environment Setup
After installation by "rpm" is complete, a file for ETERNUSmgr environment setup script with the name "stxpollset.sh," will be created in the installation directory (default is "/opt/FJSVgrmgr"). Transfer "stxpollset.sh" to the installation directory, and then execute.
Executing "stxpollset.sh" must be conducted by the superuser.
From here on, input each type of parameter by interacting with ETERNUSmgr environment setup script "stxpollset.sh".
12 | Copyright 2009 FUJITSU LIMITED |
|
