Chapter 1 Installing ETERNUSmgr
> 1.6 Procedure
•Target Flag
#Polling Server Flag
TARGET_FLAG = Device type flag specified in Step 1 (1 = ETERNUS3000, GR710, GR720, GR730, 2 = ETERNUS6000, GR740, GR820, GR840, 4 = ETERNUS2000, ETERNUS4000, ETERNUS8000, ETERNUS DX400 series, ETERNUS DX8000 series)
If "1=ETERNUS DX400 series" was selected in Step 1, then "TARGET_TYPE=ETERNUS DX400".
If "2=ETERNUS DX8000 series" was selected in Step 1, then "TARGET_TYPE=ETERNUS DX8000".
The target type name can be modified
•Target Address
# Polling Server Address
TARGET_ADDR = Target Address specified in Step 3
•Admin Mail Address
# Admin Mail Address
ADMIN_MAIL = Mail address specified in Step 4
•Alarm History Index URL
# HTTP Server URL
HTML_ALARMFILE_URL = URL specified in Step 2 followed by "/html_1"
•Log Files Directory
# Log File Saved PATH
LOGFILE_PATH = Installation directory followed by "/log_1"
The parameters of the setup file can be edited after executing the environment setup script.
The settings to operate ETERNUSmgr by the Web are contained in ETERNUSmgr Top Menu directory (default is "/opt/FJSVgrmgr/www"). For information on how to perform these settings, refer to the Web server manual for further details.
The following files are stored in the installation directory, after installation by rpm and ETERNUSmgr environment setup.
•stxpolld
•stxchk
•_STXPOLL.INI
•STXPOLL_1.INI
•stxpoll
•stxpollset.sh
•www/index.htm
•www/menu.htm
•www/fujitsu.gif, www/eternus.gif
The following explains each file and directory:
stxpolld
ETERNUSmgr daemon.
stxchk
Checks the ETERNUSmgr setup file.
15 | Copyright 2009 FUJITSU LIMITED |
|
