Basic Scanning Operation Flow (for Windows Users)
110
Scanning
Scan a document in the following procedure:
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 57).
2. Press the [Scan] button on the ScanSnap to start a scan.
DThe [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] dialog box appears.
When you scan more than one document, the preview area will display the scanned
images in thumbnails. Up to 150 thumbnails can be displayed.
DThe Quick Menu appears when the scanning is completed.
HINT
zThe [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can switch the
[Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap Manager. For details, refer to
"Scanning Only One Side of a Document" (page 217).
zYou can also start scanning from the Right-Click Menu.
For details, refer to "Right-Click Menu (Windows)" (page 34).
ATTENTION
zDo not connect or disconnect the ScanSnap and other USB devices during scanning.
zDo not close the ADF paper chute (cover) during scanning.
zDo not switch users during scanning. Doing so will cancel scanning.
zDo not allow the ScanSnap to enter into sleep mode during scanning.
HINT
Press the [Stop] button to stop scanning the document. For details, refer to "Stopping the Scan"
(page 112).
Preview