Cleaning the Outside of the ScanSnap
435
Cleaning the Outside of the ScanSnapClean the outside of the ScanSnap, the ADF paper chute (cover), the ADF top section, and
the stacker in the following procedure.
How to perform cleaning
1. Unplug the cables from the ScanSnap.
2. Clean the outside of the ScanSnap with a dry cloth, or a cloth
moistened with Cleaner F1/mild detergent.
ATTENTION
zNever use paint thinner or any other organic solvents.
zBe careful not to get any moisture or water inside the scanner during cleaning.
zIt may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Mild detergent or
Cleaner F1
Cloth
Thinner