Using ScanSnap with the Quick Menu (for Windows Users)
136
Procedures
1. Load a document in the ScanSnap.
For details, refer to "How to Load Documents" (page 57).
2. Press the [Scan] button on the ScanSnap to start a scan.
DThe Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Print], move the mouse cursor to the [Scan to Print]
icon , and then click . For details about how to change the settings,
"Preferences" (page 138).
3. Click the [Scan to Print] icon .
DThe [Scan to Print] dialog box appears.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to "Basic Scanning Operation
Flow" (page 108).
HINT
You can configure the settings to not show the [Scan to Print] dialog box. If you configure the settings
to not show the [Scan to Print] dialog box, printing is performed directly.
For details about how to change the settings, "Preferences" (page 138).