How to Load Documents
57
How to Load Documents
Load documents in the ScanSnap in the following procedure.
For details about documents that can be loaded, refer to "Documents for Scanning" (page
52).
1. If you are loading multiple sheets, check the number of sheets.
The maximum number of sheets in the ScanSnap is as follows:
For A4 or smaller sizes: Up to 50 sheets can be loaded (with paper weight of 80 g/m2
[20 lb] and thickness of the document stack under 5 mm).
2. Fan the documents.
1. Hold both ends of the documents and fan them a few times.
2. Rotate the documents by 90 degrees and fan them in the same manner.
3. Straighten the edges of the documents and slightly displace the top
edges at an angle.
ATTENTION
If you try to scan more than the maximum amount that can be loaded, the following problems may occur:
zFiles cannot be properly created due to excessive file size.
zPaper jams during scanning
ATTENTION
Paper jams or damage to documents may occur if you scan the documents without aligning the
edges first.
BackBack
At an angle
Feed direction