171
PRIMERGY RX100 S2 User’s Guide
7
Installing Internal Options

■PCI Slot Specifications

• PCI slots 1 and 2 are both 64-bit, 66MHz PCI slots.
• PCI slot 1 can be used for a LowProfile PCI card only.
• The PCI slots conform to the PCI local bus specifications (Rev. 2.2).

7.4.2 Installable Expansion Cards and Notes

This section explains expansion cards that can be installed and provides notes on installation.

■Installable Expansion Cards

Up to two expansion cards listed on the following table can be installed in the server.

■Location and Order of Expansion Card Installation

For expansion cards, use the PCI slots in accordance with the order indicated in the following table.
Follow the Installation order shown in the table when installing the cards and drivers. If you turn on the
power after installing multiple expansion cards simultaneously or in a wrong order, they will not
function properly.
-: Not installable.
table: List of Installable Expansion Cards
Installable expansion card
(Model name)
Number of
cards Remarks
Eth. Ctrl 1000-BASE-T Cu (PG-1852) 1 1
2
1000BASE-T
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) 1 1000BASE-T, dual-port
RAID Ctrl 1-Channel 64MB
(PG-141C1L) 1
2
For internal array systems
(Ultra 320 SCSI, 1-ch, LowProfile)
SCSI Ctrl U160 lp (PG-130L) 2For an internal hard disk unit and an external
SCSI option (Ultra 160 SCSI, LowProfile)
Eth. Ctrl 1000-BASE-SX Fibre LC lp
(PG-1882L)
1
1
1000BASE-SX, LowProfile
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) 1 1000BASE-T, LowProfile
table: Installation Order and Slots for Expansion Cards
Installable expansion card (Model name) PCI slot Installation Order
1 2
Eth. Ctrl 1000-BASE-T Cu (PG-1852) - 1 1
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) - 1 2
RAID Ctrl 1-Channel 64MB (PG-141C1L) 1 - 3
SCSI Ctrl U160 lp (PG-130L) 1 2 4
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L) - 1 5
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) - 1 6