Fujitsu RX100 S2 8.1 Jumper Pin Settings

190
Chapter 8 Hardware Configuration/Utilities
8.1 Jumper Pin Settings
This section explains the jumper pins.
8.1.1 Jumper Pin Setup Procedure
1Turn off the power and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
2Touch a metal part of the server to discharge static electricity.
3Remove the card locking frame.
"7.4 Installing Expansion Cards" (pg.170)
4Change the jumper pin settings.
"8.1.2 Jumper Pins" (pg.190)
5Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
8.1.2 Jumper Pins
The following explains how to set the jumper pins ("q" in "1.3.4 Baseboard" (pg.26)) on the
baseboard.
•JP1 ("q" in "1.3.4 Baseboard" (pg.26))
Sets whether or not to clear the CMOS.
table: Jumper Settings
The jumper settings (short settings) Description
1-2 (at the time of purchase) Does not clear the CMOS.
2-3 Clears the CMOS.
After the CMOS has been cleared, return the jumper to the
original setting.
231