197
PRIMERGY RX100 S2 User’s Guide
8
Hardware Configuration/Utilities

8.2.4 Boot Options Submenu

Appears when [Boot Options] is selected from the [Main] menu.

Sets system startup options.

table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Enabled (Fixed parameter) Sets whether or not to stop the boot process and
shut down the system, in case a POST (Power On
Self Test) error is detected.
Keyboard Check • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to check keyboard connection
during POST.
SM Error Halt Enabled (Fixed parameter) Sets whether or not to stop the boot process and
shut down the system in case a fan error, a
temperature sensor error, or a voltage error is
detected.
Quick Boot Disabled (Fixed parameter) Sets whether or not to run POST in short mode.
Quiet Boot • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to display the logo screen
instead of POST information.
Memory Testing Enabled (Fixed parameter) Sets whether or not to check the memory during
POST.
Boot Menu • Disabled
• Enabled (at the time of
purchase)
Sets whether to enable or disable the boot menu.
Boot Sequence - Sets the order of selected drives to boot the OS.
"■ Boot Sequence Submenu" (pg.198)
MultiBoot for HDs Enabled (Fixed parameter) Sets whether to enable or not to specify the order of
hard disks to boot the OS when multiple hard disk
units are installed.
PhoenixBIOS Setup Utility
Item Specific Help
Main
POST Errors: [Enabled]
Keyboard Check: [Enabled]
SM Error Halt [Enabled]
Quick Boot: [Disabled]
Quiet Boot: [Enabled]
Memory Testing: [Enabled]
Boot Menu: [Enabled]
Boot Sequence:
MultiBoot for HDs [Enabled]
Boot Options
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit