43
PRIMERGY RX100 S2 User’s Guide
1
2
3
4
5
6
7
9
8
Checking before OS Installation
2.2 Selecting the Installation Method
When installing the OS for the first time, there are multiple installation methods. Refer
to the following to decide on the method.
To set up multiple servers with the same model and configuration, refer to "3.5 Installation on Multiple
(the Second and Subsequent) Servers" (pg.103).
■Installation Using ServerStart
When an OS is installed using ServerStart, the driver for the expansion card that is automatically
recognized will be installed automatically. In addition, high reliability tools and array controller
administrative tools are installed automatically. Installation using ServerStart is recommended under
special circumstances.
For features of ServerStart, refer to "1.2.1 Setup Support Tool - ServerStart" (pg.16).
■Installation While Maintaining the Established RAID Environment
In guided mode or preconfiguration mode, select [Use existing array] for [Configuration mode] at
[RAID Wizard] (in the [RAID Configuration] window) and install the OS.
■Installation Using ServerStart While Maintaining the Existing
Partitions
Use the Expert mode of ServerStart. In expert mode, start up "Disk Manager", format the installation
partition, and install the OS.
Refer to "3.1 Guided Mode" and perform installation.
* If you follow the wizard, setup will be performed
correctly.
Linux
Windows Server 2003
/Windows 2000 Server
Installation is performed manually.
Refer to "4.2 Starting Manual Installation"
and perform installation.
When setting setup information in advance on
the client computer, refer to "3.2 Preconfiguration
Mode" and perform installation.
What OS will you use?
Will you use ServerStart?
No
Yes
For the use of Linux, refer to the Fujitsu PRIMERGY
website (http://primergy.fujitsu.com).