How to Perform a Scan (for Windows Users)
57
7. Press the [Scan] button on the ScanSnap.
Scanning is started.
The [Scan] button on the ScanSnap blinks blue during the scanning operation.
The following dialog box appears to indicate the scanning status.
When the scanning is complete, the Quick Menu appears.
By default, the [Scan] button settings are set to [Duplex Scan (Double-sided)].
With ScanSnap Manager, you can switch the [Scan] button settings to [Simplex Scan
(Single-sided)] mode. For details, refer to "Changing Scanning Settings" (page 64).
You can start scanning from the Right-Click Menu.
For details, refer to "Right-Click Menu" (page 52).
Do not connect or disconnect the ScanSnap and other USB devices during the scan-
ning operation.
Do not close the ADF paper chute (cover) during the scanning operation.
Do not switch users during the scanning operation. Doing so cancels scanning.