2.Change the scanning settings on the "ScanSnap Manager - Scan and Save Settings" window.

You can update your last-saved settings for scanning when [Settings] is selected.

There are six tabs used to configure the scan options at maximum (The number of tabs displayed and items that can be configured vary depending on the operation mode.)

3.Click the [Apply] button to finish the configuration.⇒The new settings are enabled.

3.3 Scanning Office Documents

This section describes how to scan the documents generally used in most offices. The ScanSnap can scan the documents in various sizes.

For details of how to scan documents, refer to "Chapter 3 Using the ScanSnap" of "ScanSnap S300M Operator’s Guide."

1.Pull up the Paper chute guide and open the extension in the order given, and load the documents onto the ScanSnap.

Paper chute guide

Side guide

1

 

234567890

A

 

BC

 

DE

 

FG

Set the paper face- down with its top margin towards the scanning direction.

Scanningdirection

[SCAN] button

2.Adjust the side guides to the width of the loaded document.

ScanSnap S300M Getting Started 24