Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu S300M CD-ROM, Refer to the, to learn more, ⇒Scanning is started, " on the ScanSnap Setup, 3.Press the [SCAN] button

1 38

Download 38 pages, 1.07 Mb

3.Press the [SCAN] button.⇒Scanning is started.⇒The ScanSnap Quick Menu appears after scanning.

4.Select a desirable action in the ScanSnap Quick Menu for the image of the scanned document.

HINT

The scanning method above is for the case where the "Quick Menu Mode" is applied.

If you switch to the "Profile Mode," you will be able to perform the scanning operation with the specified application without the ScanSnap Quick Menu displayed. You can also switch to any settings for scanning if you register scanning configurations to the "Select a Profile" window in advance. When you become accustomed to the ScanSnap operation, switch the Operation Mode during operation when needed.

The Operation Mode can be switched by clicking and holding the ScanSnapManager icon on the Dock menu and then marking [Use Quick Menu].The ScanSnap can scan documents using various settings.

Refer to the "ScanSnap S300M Operator's Guide" on the ScanSnap Setup CD-ROM to learn more.

Contents

Chapter 2 Connecting the ScanSnap Chapter 3 How to Use the ScanSnap Chapter 4 Troubleshooting Introduction Manufacturer Trademarks How Trademarks and Product Names Are Indicated In This Manual ScanSnap and the Manuals Regulatory Information Canadian DOC Regulations Bescheinigung des Herstellers / Importeurs International ENERGY STAR® Program Use in High-SafetyApplications Conventions Symbols Used in This Manual Screen Examples in This Manual About Maintenance Safety Precautions Do not use the scanner while driving a car for safety. Accidents can happen The following describes important cautions Page Chapter 1 Preparation 1.1 Checking the Contents of the Package 1.2 Names and Functions of Parts ■Front View ■Rear View Chapter 2 Connecting the ScanSnap 2.1 Installing the Supplied Software ■Installing Cardiris ■Installing ScanSnap Manager 4.After the installation is complete, eject the CD-ROMfrom the CD-ROMdrive ⇒The ScanSnap Manager icon appears on the Dock menu ScanSnap S300M Operator’s Guide 2.2 Connecting the ScanSnap ■Connecting the cable • When using the USB bus power cable, your computer must have two USB ports; one for power feeding, the other for USB cable connection •When connecting with the Power cable: Use the power cable and USB cable 1.Connect the Power cable •When connecting with the USB bus power cable: Use the USB bus power cableand USB cable 1.Connect the USB bus power cable ■Turning the ScanSnap ON 3.The connection of the ScanSnap is complete Chapter 3 How to Use the ScanSnap 3.1 Scanning Documents 3.2 About the Scanning Settings 3.3 Scanning Office Documents 3.Press the [SCAN] button ⇒Scanning is started ⇒The ScanSnap Quick Menu appears after scanning The Operation Mode can be switched by clicking and holding the ScanSnap Manager icon on the Dock menu and then marking [Use Quick Menu] 3.4 Scanning Business Cards using Cardiris 3.Check the image data of the scanned business cards in the Cardiris window The images of each business card are displayed on the right A list of already scanned business cards is displayed on the left Under the image, the recognized characters are displayed 4.Should there be any recognition errors, correct the data manually 6.On the "Format:" pop-upmenu, select "Address Book 7.Click the [OK] button 8.Click the [Send] button or select [Process] - [Send] on the menu bar 9.On the menu bar, select [Cardiris] - [Quit Cardiris] to quit Cardiris Chapter 4 Troubleshooting 4.1 Troubleshooting Checklist refer to "Appendix A Uninstalling ScanSnap" in "ScanSnap S300M Operator’s Guide Page 4.2 Clearing Paper Jams Chapter 5 Daily Care 5.1Cleaning Materials 5.2 Cleaning the ScanSnap Exterior 5.3 Cleaning Inside of the ScanSnap Chapter 6 Consumables Use only the consumables specified by PFU LIMITED 9.2 Replacing the Pad ASSY 9.3 Replacing the Pick Roller