5.3 Cleaning Inside of the ScanSnap

Clean inside of the ScanSnap with a cloth moistened with Cleaner F1.

In an alternating succession of scanning documents, the accumulated paper-powder and dust inside the ScanSnap causes a scanning error.

As a guideline, clean the ADF every 200 sheets of documents. Note that this guideline varies according to the type of documents you are scanning. For example, the ADF must be cleaned more frequently when scanning documents on that the toner has not been sufficiently fixed on.

Clean the ADF according to the following procedure referring to the illustrations.

ATTENTION

•Never use water or neutral detergent to clean the inside of the ScanSnap.

•Do not use aerosol sprays to clean the ScanSnap. Aerosol sprays cause dirt and dust to enter the ScanSnap, resulting in the ScanSnap failure, malfunction and image error.

1.Open the ADF while pulling the Cover open lever.ADF

Cover open lever

2.Clean the following locations with a cloth moistened with Cleaner F1.Glass (x2)

(Located on the ADF cover and the base unit.)

Pad ASSYPlastic rollers (x4)

White sheets (x2) Pick roller

Eject rollers (x2)Feed rollers (x2)

For more details, refer to "Chapter 8 Daily Care" in the "ScanSnap S300M Operator’s Guide."

ScanSnap S300M Getting Started 34