Fujitsu S500M 4.2. Clearing Paper Jams

4.2. Clearing Paper Jams

1.Pull the Cover open lever and open the ADF.

2.Remove the jammed document.

3.Close the ADF.

Click!

ADF

Cover open lever

ÖGently push the ADF until you hear it click when returning it to its original position.

ScanSnap S500M for Macintosh Getting Started 11

Contents

P3PC-1742-01EN Contents Introduction „ScanSnap and the Manuals „Regulatory Information „Conventions „Safety Precautions 1. Preparation 1.1.Checking the Contents of the Package 1.2. Name and Function of Parts „Front Side „Buttons 2. Connecting ScanSnap 2.1. Installing the Supplied Software 2.1.1.Installing Adobe Acrobat 2.1.2. Installing ScanSnap Manager 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable 2.2.2. Connecting the USB cable 3. How to Use ScanSnap 3.1. Scanning Documents 3.2. About the Scan Settings 3.3. Scanning Office Documents 4. Troubleshooting 4.1. Troubleshooting Checklist http://scansnap.fujitsu.com 10 | 4.2. Clearing Paper Jams 5. Daily Care 5.1. Cleaning Materials 5.2. Cleaning the Scanner Exterior 5.3. Cleaning Inside of the scanner Page 6. Replacing Consumables 6.1.Part Numbers and a Replacement Cycle of Consumable 6.2. Replacing the Pad ASSY 6.3. Replacing the Pick Roller 6.Remove the Pick roller with its shaft 7.Remove the Pick roller from the shaft Pull out the shaft from the Pick roller while lifting up its tab 8.Attach a new Pick roller to the shaft Insert the Pick roller shaft aligning the key with the slot on the Pick roller Page Page Page Page Page © PFU LIMITED PRINTED IN CHINA