Pad ASSY (x1)
Clean the Pad ASSY by wiping downward. When cleaning the Pad ASSY, take care to prevent the cloth from catching on the pick spring.
Glass (x2 on the ADF and the base unit)
Clean lightly.
Pick roller (x1)
Clean lightly taking care not to scratch and damage the surface of the roller. Take particular care when cleaning the Pick roller as black debris on the roller adversely affects the pickup performance.
Plastic rollers (x4)
Clean them lightly while rotating the rollers with your fingers. Take care not to roughen the surface of the rollers. Take particular care when cleaning the plastic rollers, as black debris on the rollers adversely affects the pickup performance.
Turn on the scanner before cleaning the following locations. Clean the following rollers, while rotating them.
Feed rollers (x2)
Clean the rollers lightly taking care not to roughen the surface of the rollers. Take particular care when cleaning the feed rollers, as black debris on the rollers adversely affects the pickup performance.
Eject rollers (x2)
Clean the rollers lightly taking care not to roughen the surface of the rollers. Take particular care when cleaning the eject rollers, as black debris on the rollers adversely affects the pickup performance.
To rotate the feed rollers and the eject rollers, press the [POWER] button while holding down the [SCAN] button.
As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn.
cWhile holding down the [SCAN] button.
d...press the [POWER] button.
ATTENTION | Connect the AC adapter and AC cable only |
| when cleaning the Feed rollers and the Eject |
| rollers. |
3. Close the ADF.
ADF
ÖYou should hear the ADF click into position when it returns to its original position.
ATTENTION | When you closed the ADF, make sure that it is |
| completely closed. Otherwise, paper jams or other |
| feeding troubles may occur. |
ScanSnap S500M for Macintosh Getting Started 13