Fujitsu S500M 19

12. Close the ADF.

ADF

ÖYou should hear the ADF click when it returns to its original position.

13.Turn on the scanner.

ÖScanSnap Manager icon changes from to.

14.Click and hold down the mouse button on the

"ScanSnap Manager" icon in the Dock menu, and select [Check consumable supplies] from the pop-up menu.

15.In the “Check consumable status” window, click the [Reset] button of the consumable you have replaced.

ÖA confirmation pop-up screen appears.

ÖWhen clicking the [Yes] button, the counter is reset to “0.”

ScanSnap S500M for Macintosh Getting Started 17

Contents

P3PC-1742-01EN Contents Introduction „ScanSnap and the Manuals „Regulatory Information „Conventions „Safety Precautions 1. Preparation 1.1.Checking the Contents of the Package 1.2. Name and Function of Parts „Front Side „Buttons 2. Connecting ScanSnap 2.1. Installing the Supplied Software 2.1.1.Installing Adobe Acrobat 2.1.2. Installing ScanSnap Manager 2.2. Connecting the Scanner 2.2.1. Connecting the AC cable 2.2.2. Connecting the USB cable 3. How to Use ScanSnap 3.1. Scanning Documents 3.2. About the Scan Settings 3.3. Scanning Office Documents 4. Troubleshooting 4.1. Troubleshooting Checklist http://scansnap.fujitsu.com 10 | 4.2. Clearing Paper Jams 5. Daily Care 5.1. Cleaning Materials 5.2. Cleaning the Scanner Exterior 5.3. Cleaning Inside of the scanner Page 6. Replacing Consumables 6.1.Part Numbers and a Replacement Cycle of Consumable 6.2. Replacing the Pad ASSY 6.3. Replacing the Pick Roller 6.Remove the Pick roller with its shaft 7.Remove the Pick roller from the shaft Pull out the shaft from the Pick roller while lifting up its tab 8.Attach a new Pick roller to the shaft Insert the Pick roller shaft aligning the key with the slot on the Pick roller Page Page Page Page Page © PFU LIMITED PRINTED IN CHINA