2. Double-click the ScanSnap icon.

Click

Click

ÖThe “Welcome to the ScanSnap Manager Installer” window appears and the installation of ScanSnap Manager starts.

3.Follow the instructions to install the software.

4.After the installation is complete, eject the CD-ROM from the CD-ROM drive.

ATTENTION

Refer to the “ScanScnap Operator’s Guide”

 

(Manual.pdf) in ScanSnap Setup CD-ROMto learn

 

more about ScanSnap Manager.

2.2. Connecting the Scanner

2.2.1. Connecting the AC cable

ATTENTION

Do not use cables other than the ones supplied

 

with this product. Use only the specified AC cables

 

and AC adapter.

1.Connect the AC cable to the AC adapter.

2.Insert the connectors of the AC adapter to the scanner inlet, and then plug the cord in a power outlet.

Outlet

Inlet

2.2.2. Connecting the USB cable

Follow the procedures below to connect the USB cable.

ATTENTION

● Use the USB cable supplied with this scanner.

 

The operation with a commercially available

 

USB cable is not guaranteed.

●When connecting to a USB hub, be sure to connect the scanner to the hub nearest to your computer (first stage). If you connect it to a USB hub from the second stage onwards, ScanSnap may not operate correctly.

1.Remove the seal from the USB connector.

2.Connect the scanner and your computer with the USB cable.

USB cable

3. Open the Paper chute of the scanner.

ATTENTION

If the scanner does not turn on automatically,

 

press the [POWER] button on the scanner.

ÖYour computer will automatically detect the scanner.

The installation of ScanSnap is complete!

ATTENTION

The "ScanSnap Manager" icon with a triangle below the icon appears in the Dock menu.

When the icon remains inactive, press the [POWER] button to turn off the scanner, and then press the [POWER] button again to restart the scanner. (Allow at least 5 seconds when you turn on/off the scanner.)

When using the [POWER] button to turn off/on the

HINT

 

scanner, press it for longer than one second.

 

 

 

 

* To prevent miss-operation, the [POWER] button

 

 

 

 

does not work unless it is pressed for longer than

 

 

one second.

 

 

 

ScanSnap S500M for Macintosh Getting Started 7