16 SPARC Enterprise T1000 Server Installation Guide • April 2007
4. Determine if the slide rails require an extension bracket.
Most rack installations do not require slide rail extension brackets. However,you
may need to install the extension brackets under the following conditions:
If your rack is deeper than 29.0 in (740mm).
If your rack requires the ends of the slide rails to be side mounted.
If required, use M6 screws to attach an extension bracket to the rearof each slide
rail, as shown in FIGURE2-5.
FIGURE2-5 Using the Extension Bracket
Note – In some very rare cases, it may be necessary to mount the extension bracket
with its side flange facing forward.
Rear