36 SPARC Enterprise T1000 Server Installation Guide • April 2007
▼To Initiate the Power On Sequence
Powering on the system requires you to use the poweron command at the SC
console.
●Toinitiate the power-on sequence, issue the poweron command.
Yousee an sc> alert message on the system console. This indicates that the system
has reset.
▼To Connect to the System Console
Output from POST,OpenBoot, and the Solaris OS is displayed in the system console
using the console command on the system controller.
●Execute the console command, and use the –f option to force the console to be
attached to your session.
Multiple users can be connected to the console, but only one can be attached.
sc> poweron
SC Alert: Host System has Reset
sc>
sc> console –f
#. (Enter #. to return to ALOM)