34 SPARC Enterprise T1000 Server Installation Guide • April 2007
Note – After setting the configuration parameters, you must reset the system
controller for the new values to take affect. See “ToReset the System Controller” on
page34.
To Reset the System Controller
Issue the resetsc command.
Youare prompted to confirm that you want to reset the system controller. Type y
when prompted.
Note – Tobypass the confirmation message, specify the –y flag to the resetsc
command.
The system controller resets, runs diagnostics, and returns to the login prompt.
diag_verbosity normal
diag_level max
diag_mode normal
sys_autorunonerror false
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
netsc_enetaddr xx:xx:xx:xx:xx:xx
sys_enetaddr yy:yy:yy:yy:yy:yy
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM POST 1.x
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test