Power Supply | Power Supply Units |
Installing occurs in reverse of order:
1 |
Figure 12: Power Supply Unit Removed with Coding Pin
ÊPush the new power supply unit into the empty slot.
IPlease note the coding of the power supply unit. Only one power supply unit, to which the coding pin (1) is attached in such a way that it does not adversely affect the installation, may be used in the PRIMERGY S60 storage subsystem. The coding may not be removed under any circumstances.
VCAUTION!
Please ensure that the power supply unit engages correctly in the mounting frame and is locked in position. This is the only way to avoid the power supply unit being shaken out of its mountings and damaged during transport.
ÊConnect the cable to the power supply unit (see the section “Mains Connection” on page 58).
ÊConnect the power cable to the mains (see section “Mains Connection” on page 58).
31 |
