Fujitsu Siemens Computers S60 manual Loosen the knurled screw on the FFx-RAID controller module

Plug-in Board Modules The FFx-RAID Controller Module

IRefer also to the MultiPath software requirements for the FFx-RAID controller settings, e. g.: both controller must be configured identically.

In a single-mode configuration (with only one module installed), the storage subsystem must be turned OFF before removing the module.

ÊRemove all connection cables from the FFx-RAID controller module connectors.

Figure 21: Loosening the Knurled Screw

ÊLoosen the knurled screw on the FFx-RAID controller module.

U41221-J-Z156-1-74 53