Fujitsu Siemens Computers S60 manual Fibre Channel FC Connection, Mains Connection

Fibre Channel (FC) Connection Connections

9.1Fibre Channel (FC) Connection

The required connectors are on the connection panel of the corresponding FFx-RAID controller module at the rear of the storage subsystem (see figure 19 on page 47).

The possibilities to configure and connect the storage subsystem are described in an additional manual (“PRIMERGY S60 Technical Configuration Guide”, see“Related publications” on page 81).

ÊSet up the data connection between the system unit and the storage subsystem by connecting the plug on the cable from the system unit with the corresponding FC connector of the storage subsystem.

IPay attention that the plug is securely attached to the FC connector. Only in this way a smooth data transfer between the system unit and the storage subsystem can be ensured.

9.2Mains Connection

The storage subsystem is supplied with the mains voltage via the delivered power cables.

	2
1	2
	1

Figure 24: Connecting the Power Cable

ÊPlug the end of the power cable marked (1) into the socket of the power supply unit on the rear of the storage subsystem.

58 U41221-J-Z156-1-74