2.16 Zoom
The zoom feature allows you to double the size of the area between your vessel and any loca- tion within the current range to take a closer look at an area of interest.
1.Select location with the cursor.
2.Press and hold down the [F1 (A/C SEA)] control about two seconds if its function is set for ZOOM (default setting), or select ZOOM on the menu. Zoom appears at the top right corner when the ZOOM function is on.
Cursor
Cursor
1 Place cursor | 2 Press [F1] to zoom. |
where desired. |
|
Figure 2-13 Zoom function
Note 1: Zoom is cancelled when range or pre- sentation mode is changed.
Cancelling zoom
Press the [F1 (A/C SEA)] control again.
11
