3.11 Function Keys
The function keys (F1 and F2) work like the
Default settings
F1: Shift (brief press) or Zoom (long press)
F2: Ring brillience
How to register menu items
1.Press the [MENU] key.
2.Press [A/C SEA] (F1) or [A/C RAIN] (F2) to open the function menu.
| [ SETTING FOR F1 KNOB ] |
| ||
| SSel by omnipad & press ENT.S | |||
| <Press MENU key to escape> |
| ||
SHIFT/ | EBL | SHIFT | ZOOM | |
ZOOM | OFFSET | |||
|
| |||
RINGS | MODE | DISP | STBY | |
DATA | DISP | |||
|
| |||
INT | NOISE | PULSE | ECHO | |
REJECT | REJECT | LENGTH | STRTCH | |
TRAIL | TRAIL | TRAIL | TUNE | |
ON/OFF | TIME | TONE | A/M | |
GUARD | ALARM | DEAD | WATCH | |
IN/OUT | LEVEL | SECTOR | MAN | |
PANEL | MARK | CHARA | OTHER | |
DIMMER | BRILL | CTERS | MENU | |
EBL | VRM | NAV | WPT | |
REF | UNIT | TALKER | MARK | |
OWN | CUSOR | VECTOR | VECTOR | |
POSITN | POSITN | LENGTH | REF | |
HIS | COLLI | AUTO | NO | |
TORY | SION | ACQ | FNCTN | |
Figure 3-11 Function menu
3.Select function desired.
4.Press the [ACQ/ENTER] key.
5.Press the [MENU] key to close the menu.
3.12 Suppressing Noise
Electrical noise can be suppressed by turning on “8. NOISE REJ” on the OTHERS menu.
3.13Adjusting Brilliance of Markers
“2. Mark Brill” on the OTHER menu adjusts the brilliance of markers such as the cursor.
3.14 Outputting Target Position
Target position data can be output to the navaid in IEC 1162 format. Press and hold down the [TLL] key to output the data. This function requires position data and heading signal.
19
