Furuno FAX-410 displayed, it is possible to clear the keylock off with the, key releases the

To release this timer or keylock in the timer mode, follow the procedure below.

(1) In the timer standby mode (time for the next recording is displayed):

Press	PRG		key then the message on the
						TIMER RCV : OFF ?
right is displayed. Then,
						PUSH	E	KEY
a press of			E key releases		the timer
operation and shifts the mode to the
standard operation mode.				By pressing
C	key before fix the timer release, the
timer standby mode is maintained.
(2) In the timer operation mode (standard operation being displayed):
Press the		PRG key and the message on theright
						KEY LOCK : OFF ?
appears.		Fixing with the		E	key releases the
						PUSH	E	KEY
keylock (even though in the timer operation mode,
each key function is revised and all operations

are possible).

To release the timer mode in such a case, refer to 1.4.2. When the keylock off is

displayed, it is possible to clear the keylock off with the C key.

２.４ Description of setting mode

Shift to a set mode is made by pressing the PRG key. When the mode is set, the

message on the right is shown.		Pressing the	C key in this mode, the standard
operation mode is reset.
When a	N
				SET PRG. NO. 1-9
	0～9 key is pressed, it is possible to
set one of the following modes as explained in				ESC PUSH C KEY
1.4.1~1.4.6.
To cancel a setting after shifting to the setting
mode and before fix it, press the		PRG key.

Pressing the PRG key resets to the initial setting mode (as displayed above).

２.４.１ Switching of receiver (audio)

Switching of the internal or external receiver is set by the following procedure.

Press	1 key.	Then the receiver switching
			AF IN : INT
mode is set and message on the right appears.
			1-INT 2-EXT
The	displayed	number 1 is for internal
		- 10 -