2.3.6 Selection of reception mode
The reception mode refers IOC, speed, and normal/reverse printing and modes. The former two (IOC and speed) are automatically selected by receiving the APSS signal and phase signal. For the latter two modes, desired ones should be selected manually.
(1) Speed and IOC
When incorrect speed or IOC is selected in manual recording or when
a) Change of speed
Press SPD key, then the display on the
right appears. Press | N | key to select |
0~9 | ||
correct speed. |
|
|
SPEED:120
b) Change of | IOC |
|
|
Press IOC | key, then the display on the | ||
right appears. Press | N | key to select | |
0~9 |
correct IOC.
(2) Reverse mode
IOC:576
When recorded picture is reversed (white/black), follow the procedure below.
Press | REV | key, then | the | display | on the | REVERSE: | OFF |
・ | |||||||
right | appears. Press | N | key to | select |
| ||
0~9 | |||||||
mode. |
|
|
|
|
|
|
|
(3) Time display |
|
|
|
|
|
| |
|
|
|
|
|
| ||
A | The present time is displayed by pressing | 5 key | |||||
in the standard operation mode. |
|
|
|
When the displayed time is not correct, be sure to
reset the time by following the instructions in 1.4.5.
Right display indicates April 10, Tuesday, 12:00.
C000 JMH 3622.5 APR 10 MON 12:00
2.3.7 Timer release and release of keylock in the timer mode
When the timer is in operation (except sleep timer), function of each key (except DIM key) is locked to keep set values and hence, ordinary keying is inhibited.
- 9 -