Furuno FAX-410 TIMER RCV 1-OFF 2-ON 3-RCL 4-STR, TIMER RCV NO. 4, the E, key after setting a

receiver, 2 is for external receiver. Pressing

the E	key after setting a	N	key,
		0～9

completes the setting.

２.４.２ Setting of timer reception

This unit has 16 booking functions and each timer is set as follows.

Press 2 key. Then the timer reception setting mode is set and the message is shown on the right.The displayed number correspond to the following entries respectively.

1 : Release

2 : Setting

3: Re-calling (readout of the booking data)

4: Entry booking

TIMER RCV : 1-OFF 2-ON 3-RCL 4-STR

(1) Release
Press	1	key. Then the message is

shown on the right. Pressing the E key releases the timer mode

(2) Setting
Press	2	key.	Then the message is
shown on the right.
Select	booking number(s), 0~F,
by pressing		△	▽ key.
The display shown on the right is an example
when selecting booking number “0”.
Then, press		key to fix the selection

Plural selection of the booking numbers are acceptable. The display shown on the right is an example when select and fix the booking number “0”, “1”, “2” and “3”.

Press the E key to complete the setting.

TIMER RCV : OFF? PUSH E KEY

SET REG No. 0-F PUSH /＆&E KEY

TIMER RCV NO.: 4 0123

(3)Re-calling (readout of the booking data) Press 3 key.

Select a booking number to be confirmed by

pressing △ ▽ key. Then, contents of the booking data is displayed.

- 11 -

RECALL TIMER REG SET REG NO. 0－ F