Furuno FAX-410 ４．２ Wiring 4.2.1 DC power supply built-in type, AC power supply built-in type

４．２ Wiring

4.2.1 DC power supply built-in type

Connect black wire to “-“ (negative), and red wire to “+” (positive).

7A fuse

+ : Red

- : Black

Fig. 4.2.1 DC power cable

4.2.2AC power supply built-in type

Operation voltage (100/115/200/230 VAC) is pre-set at factory in accordance with customer’s request.

In case of changing operation voltage, re-adjust the voltage changer inside the AC power supply unit as follows.

2A fuse

HOT : Gray

COLD : Gray

Fig. 4.2.2 AC power cable

Voltage setting:

Referring to drawing in the right, change the short harness (ribbon wire) in accordance with required voltage.

For example, connect the short Harness Between CN4 and CN5 in case of 100 VAC.

Fig. 4.2.3 AC power supply unit

- 20 -