JVC 1204MNH-SW-VE, LPT0976-001B manual Manual Timer Programming, Relief Recording

SELECT WITH @

THEN PRESS [ENTER] START

	TIMER RECORDING ON HDD/DVD DECK EN 51
Manual Timer Programming	8 Press FG to select ATV PROGB, then press ENTER. Press
	FG to select the desired channel.
You can programme this unit to timer-record as many as 16	9 Press FG to select ACONFIRMB, then press ENTER.
	10 Set the other recording options as required.
programmes.
If you do not know the anumber for the programme you	● Refer to step 8 in AcTimer ProgrammingB (A pg. 49).
wish to record, use the following procedure to set your unit to	11 Press FG to select AOKB,
timer-record the programme.	then press ENTER to access			2 PROGRAMME > CALENDAR PR. (3/3)
	the Programme Confirmation			14/01/04 WED 22:30 - 23:00		1:00	BBC1
				GARDENING			28:00
						[EDUCATION] FR360
● Make sure that the unit’s built-in clock is set properly.	screen.	SELECT WITH @		INPUT TITLE		GARDENING
● Turn on the unit.	12 Press DE to select AEXITB,
		THEN PRESS [ENTER]		CATEGORY		EDUCATION
● Turn on the TV and select the AV mode.		PRESS [PROGRAMME]		VPS/PDC			OFF
	then press ENTER to	TO EXIT		WEEKLY/DAILY	MON-FRI (FOR A WEEK)
● Slide the TV/CABLE/SAT/DVD switch to DVD.
	complete timer	PROGRAMME	ENTER	REC MODE		FR360
	programming.	EXIT	SELECT		OK
CABLE/SAT	● To programme another timer,

AUX

ENTER

TVDVD

PROGRAMME

press DE to select ACONTINUEB, then press ENTER.

●If APROGRAMME OVERLAPPEDB appears on the TV screen, delete or modify the programmes.

NOTES:

● When two successive programmes are recorded on a DVD-RW

disc with Manual Timer Programming function, the beginning of

the second one may be left off the recording.

● If the copy limited programme is received during timer-recording,

the unit enters Record Pause mode. Recording starts again if it is

switched to a recordable broadcast during the time you

rtwe

1Load a recordable disc if recording to DVD.

2Press PROGRAMME to access the programme top screen.

3Press FGDE to select ACALENDAR PR.B, then press ENTER.

●When APROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMESB appears on the TV screen, you need to cancel some of the reserved programmes. (A pg. 52)

4Press FGDE to select the desired date, then press ENTER.

5Press FG to select ARECORD

TOB, then press ENTER. Press	2 PROGRAMME > CALENDAR PR. (2/3)
	14/01/04 WED 22:30 - 23:00	BBC1
FG to select the desired		[MISC. ] XP
recording deck, then press
	RECORD TO	HDD

programmed.

Satellite Receiver Users

To timer-record a satellite broadcast using Manual Timer Programming:

APerform ASatellite Receiver Control Setting (HDD & DVD Deck Only)B (A pg. 22).

BPerform AManual Timer ProgrammingB (A pg. 51).

In step 8, press AUX to change ATV PROGB to ASATB. Then press FG to enter the channel position for the satellite broadcast.

CLeave the satellite receiver’s power on.

Relief Recording

When a programme that is set for the DVD deck cannot be recorded properly, the programme is recorded to the HDD deck instead in XP mode.

●If the remaining capacity of the hard disc is not sufficient, the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts.

●If AJUSTB is selected for the recording mode, the current recording mode for the DVD deck is applied.

ENTER.

22:30

6 Press FG to select ASTARTB,	PRESS [PROGRAMME] STOP		23:00
	TO EXIT	TV PROG	BBC1
	[0]: SAT
then press ENTER. Press FG	PROGRAMME	ENTER	CONFIRM
to set the desired start time,	EXIT	SELECT

then press ENTER.

●Each press of FG increases/decreases the start time in 1- minute interval.

●To increase/decrease the start time in 30-minutes interval, press and hold FG.

7Press FG to select ASTOPB, then press ENTER. Press FG to set the desired stop time, then press ENTER.

●Each press of FG increases/decreases the stop time in 1- minute interval.

●To increase/decrease the stop time in 30-minutes interval, press and hold FG.