Filename [MX1SEU_05Name.fm]
Masterpage:Left+

18 EN INITIAL SETTINGS

Page 18 Monday, 6 December 2004 14:00

Auto Channel Set by Downloading from TV/Auto Clock

Set/Auto Guide Programme Number Set

If you have connected the unit to your TV via a 21-pin SCART
cable (Apg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step 4 on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
1Press DE to select AT-V LINKB
and press ENTER. The T-V
LINK screen will appear.
●When T-V LINK is completed,
ASCAN COMPLETEDB appears
on the TV screen. After selecting
AOKB, APLEASE WAIT...B
appears on the screen while
channel data is being
transferred to the VHS deck.
During this period
(approximately 80 seconds), the
VHS deck is not operable. It will
exit the T-V LINK mode once
APLEASE WAIT...B disappears
from the screen.
ATTENTION:
Preset positions on the front display panel increase from APR 1B;
do NOT press any button on the unit or remote control until the
front display panel shows clock time, APR 1B or A––:––B as
illustrated on page 19.
●If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
●For details, refer to the instruction manual of your TV.
●In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
●If there is a power cut, or if you press A or SET UP while
downloading or set up is in progress, it will be interrupted; be
sure to turn off the unit power once and try again from the
beginning.
●Auto Clock Set may not function properly depending on the
reception condition.
●On this unit, the characters available for station names (ID) are
A–Z, 0–9, –, Z, + and & (space). Some names of downloaded
stations may differ from those of your TV. (Apg. 85)

Preset Download

ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
we
ENTER
CABLE/SAT
DVDTV
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Perform steps 1 to 3 of AAuto Set UpB (Apg. 17) before
continuing.
After APreset DownloadB is completed, perform AMonitor SetB on
page 21.
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > AUTO CH SET
AUTO SET T-V LINK
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > T-V LINK
T-V LINK
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
MX1SEU_00.book Page 18 Monday, December 6, 2004 2:01 PM