JVC LPT0976-001B, 1204MNH-SW-VE manual Manual Channel Set

84 EN SUBSIDIARY SETTINGS

8 View the Confirmation screen.	Manual Channel Set
AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is
	Store channels that were not stored during Auto Set Up
displayed on the TV screen.
● After selecting AOKB, APLEASE WAIT...B appears on the screen	(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set
while channel data is being transferred to the VHS deck. During	(A pg. 83).

this period (approximately 80 seconds), the VHS deck is not
operable. It will exit the AUTO SET mode once APLEASE	ATTENTION:
WAIT...B disappears from the screen.	When closing the Confirmation screen, APLEASE WAIT...B
9 Press SET UP to complete the setting.	appears on the screen while channel data is being transferred to
● Using the Confirmation screen, you can skip or add channel	the VHS deck. During this period (approximately 80 seconds),
positions, enter station names and perform other operations.	the VHS deck is not operable. It will exit the current mode once
Refer to pages 84 – 85 for the procedures.	APLEASE WAIT...B disappears from the screen.

●Depending on reception conditions, the stations may not be

stored in order, and the station names may not be stored

1 Press SET UP to access the Main Menu screen.

correctly.

2 Press DE to select AINITIAL SET UPB, then press G.

● For information on scrambled broadcasts, refer to AWhen

3 Press DE to select ATUNER SETB, then press G.

Receiving A Scrambled Broadcast (HDD & DVD Deck Only)B

(A pg. 85).

4 Press FGDE to select AMANUAL CH SETB, then press

ENTER. The Manual Channel Set screen appears.

IMPORTANT:

5 Press DE to select

A

B

EDIT , then press ENTER.

● In certain reception conditions, station names may not be

6 Press FGDE to select a blank

(Example) To store in position 12.

stored correctly, and Auto Guide Programme Number Set may

position in which you want to

not work properly. When the Guide Programme numbers are

store a channel, then press

INITIAL SET UP > MANUAL CH SET

not set properly, the programme that you do not intended to

PR

CH

ID

PR CH

ID

ENTER. The Confirmation

record will be timer-recorded by the asystem of the

01

C01

----

07

----

screen appears.

02

02

CTEA

08

----

unit. When programming the timer using the asystem,

7 Press FG to select ABANDB,

03

05

1000

09

----

be sure to check the desired channel is selected correctly.

04

C79

3SAT

10

----

05

01

9LIV

11

----

(A pg. 49, 54)

then press ENTER.

06

04

AB3

12

----

● Your unit memorises all receivable stations even if reception of

<

>

MOVE

EDIT

RETURN

some of them is poor. You can delete those stations with an

The programme currently

unacceptable picture from the list. (A pg. 85, ADelete A

ChannelB)

received on the selected channel

position appears behind the

NOTES:

8 Press FG to change the band

confirmation screen.

● Fine tuning is performed automatically during Auto Channel Set.

If you want to perform tuning manually, refer to AFine-Tuning

between CH (regular) and CC

INITIAL SET UP > MANUAL CH SET

Channels Already StoredB (A pg. 85).

(cable), then press ENTER.

BAND

CH

● If you perform Auto Channel Set when the aerial cable is not

9 Press FG to select ACHB, then

CH

2

ID

----

connected properly, ASCAN COMPLETED -NO SIGNAL-B

press ENTER.

FINE

appears on the TV screen in step 8. In such a case, make sure of

10 Press FG to input the

DECODER

OFF

the aerial connection and press ENTER; Auto Channel Set will

RETURN

start again.

channel number you want to

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

EXIT

SELECT

PRESS [SET UP] TO EXIT

● If no sound accompanies the picture or the audio sounds

store.

● To enter the registered

unnatural on some channels that have been stored by Auto Set

station name (A pg. 98), press FG to select AIDB, then press

Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels. (A pg. 85,

ENTER. Press FG.

AINFORMATIONB).

● For fine tuning adjustment, press FG to select AFINEB, then

press ENTER. Press FG to perform fine-tuning.

● When storing a channel that sends scrambled broadcasts,

press FG to select ADECODERB, then press ENTER. Press

FG to set ADECODERB to AONB (AOFFB is the default setting).

● When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB, ASAT

VIDEOB or ASAT S-VIDEOB, the ADECODERB setting cannot

be changed. (A pg. 72)

11 Press ENTER to enter new channel information. The

Confirmation screen appears.

12 Press SET UP or RETURN to close the Confirmation screen.

● To change positions, see AChange Station Channel PositionB

(A pg. 85).

● If you wish to set station names other than the ones registered

in your unit, see ASet Stations (B)B (A pg. 85).

ATTENTION:

Guide Programme numbers are not set when channels are

stored manually. (A pg. 83, AcSystem SetupB)