44 EN BASIC OPERATIONS ON VHS DECK
Basic Recording |
|
| Recording Features | |
|
|
|
|
|
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
VHS/HDD/DVD
SELECT 4 9
PR +/ | 8 | REC 7 |
|
| MODE |
| CABLE/SAT | |
| TV | DVD |
VHS
PR+/-
4
7 
9
8
REC MODE 
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS on the remote so that the VHS lamp lights up on the unit.
| VHS/HDD/DVD | 7 |
| SELECT |
|
| CABLE/SAT | |
TV AV/VIDEO | TV | DVD |
|
| |
VHS |
|
|
| PR+/- |
|
DISPLAY
AUDIO
1Load a cassette with the record safety tab intact.
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
2Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS on the remote so that the VHS lamp lights up on the unit.
3Press PR +/– or the number keys to select the channel you wish to record.
4Press REC MODE repeatedly to set the recording mode.
5Press R on the unit to start recording. Or while holding R, press I on the remote control.
●The VHS recording lamp lights up on the unit.
●If AO.S.D.B is set to AAUTOB (A pg. 81), AMARKB blinks on the screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. (A pg. 45)
6Press W to pause recording.
●You can select channel during the Record Pause mode.
●To resume recording, press I.
7Press o to stop recording.
●The VHS recording lamp lights off on the unit.
Watch Another Programme While Recording On The Unit
While recording is going on, you can watch another programme on the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV in advance. (A pg. 74)
1During recording, press TV AV/VIDEO to select TV mode.
●Video mode is disengaged, and the VIDEO indicator on the front display panel lights off.
VIDEO indicator lights off.
●The programme received on the TV’s tuner is displayed on the TV screen.
2Slide the TV/CABLE/SAT/DVD switch to TV.
3Press PR +/– repeatedly to select the desired channel.
Elapsed Recording Time Indication
1Press DISPLAY until a counter reading appears on the front display panel.
2Press CANCEL to reset the counter before starting recording or playback.
●The counter is reset to A0:00:00B and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.
