JVC LPT0976-001B, 1204MNH-SW-VE manual Watch Another Programme While Recording On The Unit

38 EN BASIC OPERATIONS ON HDD DECK

	Recording Features		Watch Another Programme While Recording On The Unit
While recording is going on, you can watch another programme on
			the TV by using the TV’s tuner.
● Turn on the unit.			NOTE:
● Turn on the TV and select the AV mode.			It is required that the remote control is set to be able to operate the
● Slide the TV/CABLE/SAT/DVD switch to DVD.
			TV in advance. (A pg. 74)
● Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD
			1 During recording, press TV AV/VIDEO to select TV mode.
		on the remote so that the HDD lamp lights up on the unit.
				● Video mode is disengaged, and the VIDEO indicator on the
				front display panel lights off.

HDD lamp	VHS/HDD/DVD
	SELECT

PR +/	DISPLAY	7
	CABLE/SAT
	TV	DVD

TV AV / VIDEO

HDD

PR+/-

REMAIN

DISPLAY

VIDEO indicator lights off.

●The programme received on the TV’s tuner is displayed on the TV screen.

2Slide the TV/CABLE/SAT/DVD switch to TV.

3Press PR +/– repeatedly to select the desired channel.

NOTE:

If a decoder is connected to the unit (A pg. 77), you can select a scrambled channel as well as other normal channels.

Elapsed Recording Time And Disc Remaining Time Indication

During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.

●Each time you press DISPLAY, the time indication changes as follows:

Elapsed recording time N Disc remaining time N Clock N (Back to the beginning)

●You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress. The list of disc remaining times for all recording modes appears on the TV screen.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-minutes interval), and shuts the unit off after recording is finished.

1Press R on the unit to start recording.

2Press R again to engage the ITR mode.

●On the front display panel, A0:30B appears.

3If you want to record for more than 30 minutes, press R to extend the time. Each press extends recording time by 30 minutes.

NOTES:

●You can only perform ITR using the R button on the unit.

●When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit is automatically shut off.

Receiving Stereo And Bilingual Programmes

Your unit is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being	On-Screen Display
Received

A2 Stereo

A2 Bilingual

Regular Monaural

NICAM Stereo

NICAM Bilingual

NICAM Monaural

NOTES:

●ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on- screen displays will not appear. (A pg. 80)

●If the quality of stereo sound being received is poor, the broadcast might be received in monaural with better quality.