Filename [MX1SEU_08VHS Operation.fm]
Masterpage:Left+

42 EN BASIC OPERATIONS ON VHS DECK

Page 42Monday, 6 December 2004 14:01
Still Picture/Frame-By-Frame Playback
1Press W to pause during playback.
●If there is vertical jitter, press PR +/– to correct the picture.
2Press W to activate frame-by-frame playback.
●To resume normal playback, press I.

Slow Motion

1Press W to pause during playback.
2Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
●Press N for forward slow motion or O for reverse slow
motion.
●To resume normal playback, press I.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR +/– to eliminate the noises.
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
●Each press of the button increases the search speed for each
direction.
When pressing N:
(SP, LP): +5x Y +7x
When pressing O:
Once O is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of O changes
the search speed between –5x and –7x in both SP mode and LP
mode.
(SP, LP): –1x N –5x Y –7x
●To resume normal playback, press I.
One Touch Replay
During playback (or Live Memory Playback), press
w
. The unit
rewinds the picture a little (about 7 seconds) and resumes playback.
●If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press
v
1 to 6 times to skip over unwanted
sections.
●Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
●To resume normal playback, press I.

Index Search

Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press S or T to activate Index Search. AS 1B or AT 1B is
displayed on the TV screen and search begins in the
corresponding direction.
●To access index codes 2 through 9, press S or T repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press S
twice.
To locate the beginning of D from the current position, press T
once.
●When the specified index code is located, playback begins
automatically.
Playback Features
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
●the picture will be distorted.
●the noise bars will appear.
●there may be a loss of colour.
●you cannot hear the sound.
9
6
DVD
VHS
AUDIO
PR+/
-
8
4
2
5
3
PROGRESSIVE
SCAN
HDD
CABLE/SAT
DVDTV
Current position
Index number
MX1SEU_00.book Page 42 Monday, December 6, 2004 2:01 PM