|
|
|
| TIMER RECORDING ON HDD/DVD DECK EN 53 | |
| Automatic Satellite Programme |
|
|
| |
|
| ● Make sure the satellite receiver is connected to the unit’s | |||
|
| IN/DECODER] connector. | |||
| Recording |
| ● Programme the timer on the satellite receiver. | ||
|
| ● Slide the TV/CABLE/SAT/DVD switch to DVD. | |||
| (HDD Deck Only) |
|
| ||
|
| 1 Press HDD on the remote to choose the recording deck. You | |||
|
|
|
| can also press VHS/HDD/DVD SELECT on the unit repeatedly | |
|
|
| |||
This function allows you to automatically record a satellite |
| to select the recording deck. | |||
programme which is |
| 2 Set | |||
receiver. Connect a satellite receiver to the unit’s |
| (A pg. 72) | |||
DECODER] connector and programme the timer on the satellite |
| ● Also refer to AIMPORTANTB on page 76. | |||
receiver. The unit starts or stops recording by the signals input |
| 3 Press REC MODE repeatedly to set the recording mode. | |||
from the satellite receiver. After recording, the unit’s power shuts |
| ||||
| 4 Press and hold SATj for about 2 seconds to engage the | ||||
off automatically. |
| ||||
|
|
|
| Automatic Satellite Programme Recording mode. AVB and | |
ATTENTION: |
| ASATjB appear on the front display panel. | |||
● Be sure not to turn on the satellite receiver before the |
| NOTES: | |||
|
| programme is executed; otherwise, the unit will start recording |
| ● To disengage the Automatic Satellite Programme Recording | |
|
| when the satellite receiver’s power is turned on. |
| mode, press SATj. | |
● If you have connected another appliance other than a satellite |
| ● If the unit’s power is off, it is not possible to engage the Automatic | |||
|
| receiver to the |
| Satellite Programme Recording mode. | |
|
| engage the Automatic Satellite Programme Recording mode; |
| ● In step 4, if AVB blinks quickly on the front display panel even | |
|
| otherwise, the unit will start recording when the connected |
| though your satellite receiver’s power is off, Automatic Satellite | |
|
| appliance’s power is turned on. |
| Programme Recording will not work properly with that satellite | |
● Automatic Satellite Programme Recording and |
| receiver*. If this is the case, perform AManual Timer | |||
|
| cannot be done at the same time. |
| ProgrammingB (A pg. 51) to | |
VHS/HDD/DVD
SELECT
REC MODE
CABLE/SAT
TV
DVD
HDD 
*Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers.
●AVB blinks on the front display panel while Automatic Satellite Programme Recording is in progress.
●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.
●Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer.
●Pressing the unit’s A button while Automatic Satellite Programme Recording is in progress turns off the unit’s power and disengages the Automatic Satellite Programme Recording mode.
●If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different recording modes for each programme.
●Depending on the type of satellite receiver, the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.
●If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the unit will not start Automatic Satellite Programme Recording even though AVB blinks on the front display panel. When the satellite receiver shuts off once and is turned back on again, the unit starts recording.
●You can also record a programme from your cable system in the same way if the system has a timer.
●Just Clock (A pg. 86) does not work when the Automatic Satellite Programme Recording mode is engaged.
REC MODE
SAT#
