JVC LPT0976-001B, 1204MNH-SW-VE manual Perfect Connections Recommended, Simple Connections

76 EN SYSTEM CONNECTIONS

Connecting To A Satellite Receiver		Perfect Connections (Recommended)
		This is an example of recommended connections if your TV
Simple Connections
		has two 21-pin AV input (SCART) connectors.
		Connect the decoder to the satellite receiver’s connector if you
This is an example of a simple connection if your TV has one		have a decoder, [L-1 IN/OUT] connector to TV’s connector, and [L-
21-pin AV input (SCART) connector.		2 IN/DECODER] connector to the satellite receiver’s connector.
Connect the satellite receiver to the [L-2 IN/DECODER] connector,		Then connect the satellite receiver and TV.
then connect the [L-1 IN/OUT] connector to the TV’s connector.		NOTES:
NOTES:		● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)
● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)		● You can use the Automatic Satellite Programme Recording
● You can use the Automatic Satellite Programme Recording		function (A pg. 53) with this connection. (HDD deck only)
function (A pg. 53) with this connection. (HDD deck only)		● To record a programme via the satellite receiver, select L-2 mode
● To record a programme via the satellite receiver, select L-2 mode		by pressing PR +/– so that AL-2Bappears on the front display
by pressing PR +/– so that AL-2Bappears on the front display		panel.
panel.		● To receive a scrambled broadcast, descramble the signal with
● For details, refer to the instruction manual of the satellite		the decoder connected to the satellite receiver.
receiver.		● For details, refer to the instruction manual of the satellite receiver
		and decoder.
Outdoor unit	Aerial	Outdoor unit	Aerial
Satellite cable	TV aerial cable
		Satellite cable	TV aerial cable
Satellite receiver
	ANTENNA IN	Satellite receiver
	ANTENNA OUT		ANTENNA IN
			ANTENNA OUT

TV

IMPORTANT

When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB(A pg. 72), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV AV/VIDEO on the remote control to turn off the VIDEO indicator on the front display panel.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV AV/ VIDEO on the remote control to set the unit to the AV mode.

Decoder

TV