TROUBLESHOOTING EN 91
Playback (VHS Deck)
The VHS deck cannot be operated.
●The VHS deck is not selected.
NPress VHS/HDD/DVD SELECT on the unit repeatedly or VHS on the remote so that the VHS lamp lights up on the unit.
The tape will not rewind or
●The tape is already fully rewound or
The playback picture does not appear while the tape is running.
●The TV is not set to the AV mode. N Set the TV to the AV mode.
Noise appears during visual search.
●This is normal.
Noise appears during normal playback.
●The automatic tracking mode is engaged. N Try manual tracking. (A pg. 43)
The playback picture is blurred or interrupted while TV broadcasts are clear or AUSE CLEANING CASSETTEB message appears on the screen.
●The video heads may be dirty.
NUse a dry cleaning cassette
Breaks are noticeable in
●The automatic tracking mode is engaged. N Try manual tracking. (A pg. 43)
Recording (DVD Deck)
The desired programme cannot be recorded.
●The channel position does not correspond to that in the receiving area.
NSet the correct channel position for the receiving broadcast. (A pg. 83)
Recording cannot be made.
●No disc or a disc not being compatible with the unit is loaded. N Load a recordable disc on the unit. (A pg. 5)
●The disc loaded is not formatted.
NFormat the disc. (A pg. 87)
●A finalised
NRecording cannot be made on finalised discs. Load a recordable disc on the unit.
●The disc is full or does not have enough space for the title to be recorded.
NClear unnecessary titles on the disc or load a blank disc.
(A pg. 59)
●The
NRelease the protect tab. (A pg. 8)
Recording (HDD Deck)
TV broadcasts cannot be recorded.
●
Camcorder recording is not possible.
●The camcorder has not been properly connected. N Confirm that the camcorder is properly connected.
●The input mode is not correct.
NSet the input mode to
Recording (VHS Deck)
During recording, the tape does not run. The VHS recording lamp lights up on the unit.
●The unit is in the Record Pause mode. N Press I to resume recording.
Recording cannot be done.
●There is no cassette loaded, or the cassette loaded has had its record safety tab removed.
NInsert a cassette, or using adhesive tape, cover the hole where the tab was removed.
TV broadcasts cannot be recorded.
●
Camcorder recording is not possible.
●The camcorder has not been properly connected. N Confirm that the camcorder is properly connected.
●The input mode is not correct.
NSet the input mode to
The tape is automatically rewound, then the unit is shut off.
●The end of the tape was reached during recording.
NThe programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.
Timer Recording (HDD & DVD Deck)
Timer programming cannot be made.
●Date and time is not correct.
NSet date and time correctly. (A pg. 86)
● Timer recording is in progress.
N Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.
Timer programming recording does not start.
●Date and time is not correct.
NSet date and time correctly. (A pg. 86)
aTimer Programming cannot be made.
●Date and time set on the unit is not correct. N Set date and time correctly. (A pg. 86)
●The channel position does not correspond to that in the
receiving area.
NSet the correct channel position for the receiving broadcast. (A pg. 83)
The asystem does not timer-record properly.
●The unit’s channel positions have been set incorrectly.
NRefer to AcSystem SetupB (A pg. 83) and reperform the procedure.
