1.18 White Marker

The white marker functions to display a par- ticular echo color in white. For example, you may want to display the bottom echo (red- dish-brown) in white to discriminate fish ech- oes near the bottom. Note that the bottom must be displayed in reddish-brown for the white marker to function.

1.Press the MENU ESC Key.

2.Press or to select MARKER.

3.Press s to select WHITE MAKER

4.Press the MENU ESC Key.

5.Press or to select color to display in white. As you press or the arrow next to the color bar shifts and selected echo color is displayed in white.

WHITE MARKER

: UP

: DOWN

Figure 1-32 White marker display

Arrow points to

color currently displayed in white.

1.19Fine Adjustment of Gain in Dual-Frequency Operation

The gain of both the 50 kHz and 200 kHz transducers can be adjusted individually on the User menu as follows:

1.Press the MENU ESC key.

2.Select GAIN ADJ 200kHz or GAIN ADJ 50kHz.

3.Press t or s to adjust gain.

4.Press the MENU ESC key.

Figure 1-33 Color bar when white

marker display is on

To turn the white marker function off, set the arrow below the weakest color in the color bar in step 5 of the above procedure.

13

Page 21
Image 21
Furuno FCV-600L manual White Marker, Fine Adjustment of Gain in Dual-Frequency Operation