Furuno FE-700 installation manual Safety Instructions

Models: FE-700

1 60
Download 60 pages 55.01 Kb
Page 3
Image 3

SAFETY INSTRUCTIONS

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment unless totally familiar with electrical circuits and service manual.

Only qualified personnel should work inside the equipment.

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can result in fire, electrical shock or equipment damage.

Be sure no water leaks in at the trans- ducer mounting location.

Water leakage can sink the vessel. Also confirm that the transducer will not loosen by ship’s vibration. The installer of the equipment is solely responsible for the proper installation of the equipment. FURUNO will assume no responsibility for any damage associated with improper installation.

Be sure that the power supply is compatible with the voltage rating of the equipment.

Connection of an incorrect power supply can cause fire or equipment damage. The voltage rating of the equipment appears on the label above the power connector.

CAUTION

Observe the following compass safe distances to prevent deviation of a magnetic compass:

 

Standard

Steering

 

compass

compass

 

 

 

Display

0.50 m

0.40 m

unit

 

 

 

 

 

Distribution￿

1.90 m

1.15 m

Box

 

 

 

 

 

Matching Box

0.50 m

0.40 m

 

 

 

Transducer

1.00 m

0.60 m

Switch Box

(option)

 

 

Junction Box

0.30 m

0.30 m

(option)

 

 

 

 

 

Digital depth

0.50 m

0.40 m

indicator (option)

 

 

 

 

 

Distribution box

0.30 m

0.30 m

(option)

 

 

 

 

 

When handling the transducer cable, keep in mind following points.

Keep the cable away from oil and fuel.

Keep the cable away from the place where it may be damaged during the installation.

Do not paint the cable.

The sheath of the transducer cable is made of chlorophrene rubber (or vinyl chloride). Therefore, do not paint the sheath with organic liquid (such as toluene) since it may harm the sheath.

i

Page 3
Image 3
Furuno FE-700 installation manual Safety Instructions