SAFETY INSTRUCTIONS
Safety Instructions for the Installer
WARNING
Do not work inside the equipment unless totally familiar with electrical circuits.
Hazardous voltage which can shock, burn or cause serious injury exists inside the equip- ment.
Turn off the power at the mains switchboard before beginning the installation.
Post a sign near the switch to indicate it should not be turned on while the equipment is being installed.
Fire, electrical shock or serious injury can result if the power is left on or is applied while the equipment is being
CAUTION
Ground the equipment to prevent electrical shock and mutual interference.
Confirm that the power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the display unit.
Use the correct fuse.
Use of a wrong fuse can cause fire or equipment damage.
Keep the following compass safe distance.
Standard Steering
Display unit 0.5 m 0.3 m
