Furuno GP-1850WF manual Inserting Mini Chart Card, Turning the Power On/Off, Turning the power on

1.3Inserting Mini Chart Card

Insert appropriate mini chart card before turning on the power.

Note: Static electricity can be passed through your fingers to a memory card and destroy the contents of the card. To prevent this, always touch a metallic object, such as a steel desk, before handling a memory card.

1.Push down the lid catch to open the mini chart card slot cover.

Card slot

Location of mini chart

card slot cover

2.Insert appropriate mini chart card groove side up.

Inserting groove side up.

Mini chart card

Direction of mini chart card

3.Close the slot cover to protect the chart drive. (Keep the slot cover closed at all times.)

Note: Turn off power before inserting or ejecting the mini chart card.

1.OPERATIONAL OVERVIEW

1.4Turning the Power On/Off

Turning the power on

Press the [POWER/BRILL] key at bottom left-hand side of the display unit to turn on the power. When the unit is turned on, it proceeds in the sequence shown in the figure in below, after displaying the FURUNO information display.

Displayed for about five seconds.

START UP TEST

PROGRAM	OK
RAM	OK
BACKUP DATA	OK
INTERNAL BATTERY	OK
GPS	OK

- - WARNING - -

NO NATIONAL HYDROGRAPHIC OFFICE

HAS VERIFIED THE INFORMATION

IN THIS COASTLINE DATA CARD AND

NONE ACCEPT LIABILITY FOR THE

ACCURACY OF REPRODUCTION OR ANY

MODIFICATIONS MADE THEREAFTER.

THIS PRODUCT WITH THIS COASTLINE

DATA CARD DOES NOT REPLACE THE

REQUIREMENT TO USE THE

APPROPRIATE PRODUCTS FOR

NAVIGATION ACCORDING TO NATIONAL

AND INTERNATIONAL REGULATONS.

FURUNO ELECTRIC CO., LTD.

Displayed for about 30 seconds, or press any key to escape.

The last-used display appears.

Start-up sequence

For any NG on the start up test display, request service.

The GP-1850WDF/1850WF takes about 90 seconds to find its position when turned on for the very first time. This is because the equipment has no satellite data, called the Almanac, in its database. If you want to lessen the time needed to find position you may enter your position manually (default position: San Francisco, USA) on the GPS SETUP OPTIONS menu.

Thereafter it takes about 12 seconds to find position each time the power is turned on.

1-3