Furuno GP-1850WDF manual Navigating to Waypoints waypoint list, Navigating to Ports, Port Services

8. NAVIGATION

8.2Navigating to Waypoints (waypoint list)

1.Press the [WPT/RTE] key to open the WAYPOINT & ROUTE menu.

2.Press the WAYPOINTS soft key to open the WAYPOINTS menu.

3.Press the LOCAL LIST or ALPHA/NUMERIC LIST soft key to show corresponding waypoint list.

4.Select a waypoint.

5.Press the GO TO soft key. The plotter display appears. A light-blue line runs between destination selected and own ship’s position. Arrows on the line show the direction to follow. Waypoint data appear at the top of screen.

8.3Navigating to Ports, Port Services

Some Nav-ChartsTMand C-map chart cards have a port service list which shows services available at ports or harbors. (See page 3-5.) You can use the list to set destination as follows:

1.Press the [MENU] key to open the main menu.

2.Press the DISPLAY OPTIONS soft key.

3.Press ▼ to select SET GO TO METHOD and press the EDIT soft key.

4.Press the ▲ or ▼ to select WPT/PORT SER and press the [ENTER] key or the ENTER soft key.

5.Press the [PLOT] key to return to the plotter display.

6.Press the GO TO soft key. Soft key titles change as in the figure below.

+	40° 45.971'N	FROM	0.26 nm	GO TO
	13° 57.462'E	OS	180.2°

QUICK

ROUTE

	NEAR
	SRVICE
PUNTA CORNACCHIA
ACCO AMENO	PORT
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA	CANCEL
DGPS 3D	GO TO

Plotter display

7.Press the PORT or NEAR SRVICE soft key depending on objective. PORT shows a list of ports in your area. NEAR SRVICE displays the port service list.

SELECT PORT

ACCIAROLI

ACQUAMORTA

AGNONE S. NICOLA

AGROPOLI

AMALFI

BAIA

CAPRI

CASA MICCIOLA-ISCHIA

Sample port list (southern Italy)

8-2