Furuno GP-1850WDF, GP-1850WF Clearing Memories, 13-6, Remote controller test, Clear memory menu

13. MAINTENANCE & TROUBLESHOOTING

Remote controller test

This test checks the controls of the remote controller for proper operation.

1.Press the [MENU] key followed by the CONFIGURATION, SYSTEM MENU and SELF TEST soft keys to display the self test menu.

2.Press the REMOTE CONTROLLER TEST soft key to display the screen for testing the remote controller.

REMOTE

TEST

PRESS "CLEAR" KEY 3 TIMES

TO RETURN.

RETURN

Remote controller test

3.Press the any key. The pressed key’s on-screen location turns black if the key is functioning properly.

4.To escape, press the RETURN soft key on the display unit, or press the [CLEAR] key three times on the remote controller.

13.6 Clearing Memories

The memory, which stores marks, tracks and initial settings, can be cleared to start afresh. When this done all default settings are restored.

1.Press the [MENU] key followed by the CONFIGURATION and SYSTEM MENU soft key.

2.Press the MEMORY/TRIP CLEAR soft key to open the clear memory menu.

		CLEAR
		MEMORY
CLEAR PLOTTER MEMORY NO		EDIT
CLEAR GPS MEMORY	NO
CLEAR ALL MEMORY	NO
TRIP METER RESET	NO

DGPS 3D
	RETURN

Clear memory menu

3.Press ▲ or ▼ to select memory or trip meter reset.

4.Press the EDIT soft key.

5.Press ▲ to select YES.

6.Press the ENTER soft key or the [ENTER] key to clear item selected.

Note: For CLEAR PLOTTER MEMORY and CLEAR ALL MEMORY, all waypoints and routes are cleared and default settings are restored. If you require this data, save it to a PC beforehand.

13-6