Furuno GP-1850WF Plotter Alarms, Introduction, Audio Alarm On/Off, Alarm menu, Audio alarm window

9. PLOTTER ALARMS

9.1Introduction

There are five plotter-related alarms which generate both audible and visual alarms: Arrival alarm, Anchor Watch alarm, XTE (Cross Track Error) alarm, Proximity alarm, and Speed alarm.

When an alarm setting is violated the buzzer sounds, and the speaker icon () appears in red. You may silence the alarm by pressing the [CLEAR] key. The icon remains on the screen until the cause of the alarm is removed or the alarm is deactivated.

9.2Audio Alarm On/Off

The audio alarm sounds whenever an alarm setting is violated. You can enable or disable the audio alarm as follows:

1.Press the [ALARM] key to show the ALARM menu.

AUDIO ALARM	ON	ALARM1
ARRIVAL ALARM	ON 0.100nm
ANCHOR ALARM	ON 0.050nm	EDIT
PROXIMITY ALARM ON
XTE ALARM	ON 0.100nm
SPEED ALARM	OVER/UNDER
	12.5 ~ 15.0kt	CLEAR
ALARM INFORMATION		ALARM

NO ALARM

	NEXT
DGPS 3D
	PAGE

Alarm menu

2.Press ▲ or ▼ to select AUDIO ALARM.

3.Press the EDIT soft key to show the audio alarm window.

AUDIO ALARM

▲

ON

OFF

▼

Audio alarm window

4.Press ▲ or ▼ to select ON or OFF.

5.Press the ENTER soft key or the [ENTER] key to register your selection.

9-1