2.2 OID/DID and IMN Settings
OID/DID and IMN are set on the communication unit, usually at the time of installation. The telephone for HSD calling is alos set by the installing technician. For more informa- tion, contact a FURUNO dealer or agent.
2.3 Terminal Unit Settings
“9: HSD” is added to the Terminal Setup menu on the terminal unit. Additionally, the HSD is provided with the lock switch function, which you may set it as shown below.
Press [2], [Enter].
[Terminal setup] |
| |
1: Tel No.1 | 7: Data | |
2: Tel | No.2 | 8: Telex |
3: Tel | No.3 | 9: HSD |
4:Tel No.4
5:Tel No.5
6:Tel No.6 E: Exit
Enter JOB No. 9
Press [9], [2].
[HSD]
Key Lock: Ignore/Valid
Ignore: Lock switch setting ignored; receive capability.
Valid: Lock switch setting followed; cannot transmit when lock switch is in "disable" position.
Figure 4 Terminal setup menu
5
