Furuno MU-150C manual RGB Adjustment, Brilliance Adjustment, Jumper blocks

3.2 RGB Adjustment

Color may be adjusted with the following potentiometers. Turn the potentiometers clockwise to increase color.

Model	Potentiometer Setting
FCV-1200 Series, CH-250,	Default setting
FR-1760DS
GD/GP-280/380/680, FCV-1500	Fully clockwise
Series, CH-37, CSH23/73/83,
FR-1500 MK3 Series
R1: Red
R2: Green
R3: Blue

3.3 Brilliance Adjustment

Brilliance can be adjusted from the control unit of the FCV-1200 series or CH-250 by setting jumper block J17 as below.

J17: Brilliance control circuit selection

1-2: Brilliance is adjusted from the MU-150C (default setting)

2-3: Brilliance is adjusted from the control unit of the FCV-1200 series or CH-250

Note: Do not change the setting of the J16 or J18. The default setting for both is “1-2”.

S1	S2	S3	S4 R1		J16	EXTBRILL
J16	J17		J18	R2	J17	BRILL
					J18	BRTP
1	3 1	3 1		3 R3	R1	R
					R3	B
					R2	G

Jumper blocks

S1 SEL

S2 UP

S3 DOWN

S4 RESET

12